Search This Supplers Products:Valve research and development, manufacturing ,salesbutterfly valvegate valvecheck valvesluice gategoggle valve
Paramtents
Standard or Nonstandard Standard
Structure Ball
Pressure Low Pressure
Power Electric
Material Casting
Temperature of Media Normal Temperature
Media coal gas, dusty gas, waste
Port Size DN50-DN2000
Application General
Packging & Delivery
Min Order1 piece
Briefing
Detailed
The double layer ash discharge valve is an ideal ash discharge valve in metallurgical, nonferrous metal and environmental protection dust removal equipment. Double-deck heavy hammer dump valve is a chain conveyor driven by the transmission rod through the crank, cam and connecting rod drive up and down drive shaft rotation, interactive open, through the equipped lever system or stretching springs, ensure that the feeder valve reliable reset, double-deck electric air-lock dump valve to prevent wild wind blowing, double-deck electric power
Nominal Presesure (MPA) | Shell Test | Water Seal Test |
Mpa | Mpa | |
1.0 | 1.5 | 1.1 |
1.6 | 2.4 | 1.76 |
No. | Part | Material |
1 | Body/Wedge | Carbon steel (WCB)/CF8/ CF8M |
2 | Stem | SS416 (2Cr13) / F304/F316 |
3 | Seat | SS/Stellite |
4 | Ball | Alloy steel / SS |
5 | Packing | (2 Cr13) X20 Cr13 |
Feature and usage:
The eccentric ball valve is the ideal equipment for spray pulverized coal, coke oven gas, dusty gas and granular fluid. It is widely used in metallurgy industries. There are following charcters.
1. Straight, single seal, eccentric structure is particularly used for two-phase flow of spray pulvereized coal injection medium. It will not be unobstructed flow and stuck phenomennon.
2. There is compensation dosage of seal to make sure the long time usage.
3. It is easy to change the seat to avoid the change of whole valve.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.