Search This Supplers Products:Valve research and development, manufacturing ,salesbutterfly valvegate valvecheck valvesluice gategoggle valve
US $20.001 - 10 piece
Paramtents
Standard or Nonstandard Standard
Structure Check
Pressure Low Pressure
Power Manual
Material Casting
Temperature of Media Normal Temperature
Media Water
Port Size DN50-DN400
Application General
Epoxy coating Blue
Packging & Delivery
Min Order1 piece
Briefing
Detailed
300 Check Valve is a hydraulically operated no-Slam Check Valve. This valve opens when the pressure at the inlet exceeds the discharge pressure. A gradual rate of opening prevents sudden opening surges. When a pressure reversal occurs the higher downstream pressure is applied to the cover chamber through the control tube lines, and the valve closes drip tight. This valve is ideally suited for use where a positive shutoff is required. The rubber disc assures tight sealing even if the fluid contains grit or other small-size particles.
The velocity of Open/Shutoff can be controlled by the ball valve 2 on the outlet control tube line.
Note: The effectiveness of this valve is related to pipeline velocity. We recommend a maximum flow based on pipeline velocity of 3m/s,otherwise, consideration should be given to adding a Pressure Relief Valve to the system.
For BS 4504 BS EN1092-2 PN10 / PN16/ PN25 flange mounting.
Face-to-Face dimension conforms to ISO 5752 / BS EN558.
Epoxy fusion coating.
Working Pressure | PN10 / PN16 / PN25 |
Testing Pressure | Shell: 1.5 times rated pressure, Seat: 1.1 times rated pressure; |
Working Temperature | -10°C to 80°C (NBR) -10°C to 120°C (EPDM) |
Suitable Media | Water, sewage etc. |
Shell and seal tests for each valve is done and recorded before package to make sure the product quality. The test media is water in room conditions.
Part | Material |
Body | Ductile Iron / Carbon steel / Stainless steel |
Disc | Ductile Iron / Stainless Steel |
Spring | Stainless Steel |
Shaft | Stainless Steel |
Seat Ring | NBR / EPDM |
Cylinder/Piston | Stainless steel |
If need the drawing details, please feel free to contact us.
This check valve is used for preventing the back-going of medium in pipelines and equipment, and the pressure of medium will bring the result of opening and closing automatically.When the medium is back-going, valve disc will automatically closed to avoid accidents.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.