Usually material is ductile iron, WCB, Stainless steel etc, other material could be customized.

Usually PN10, PN16, PN25 PN40 for water work, up to PN100 for small size, PN2.5, PN6 low pressure for steel plant work, etc.

Certainly, We can do OEM and ODM order. We can supply the valves as you requirment and material.

We have ISO certificate, WRAS for drinking water for rubber and epoxy painting.

No problem, we will cooperate with customers what ever we could.

Usually we accept T/T with advance payment, we could discuss according to different conditions.L/C T/T Western Union

No problem to supply sample, usually the sample we supply on cost, if official order place in future, the cost of this sample will refunded to customer. We could discuss for different condition.

We are manufacturer for 11 years with ou own land and factory.

We have export from 2008 to European such as U.K, Russia; Mid-east such as U.A.E, Poland, Jordan, Saudi Arabia, Africa such as Sudan, Tunisia; South and south east Asia such as Malaysia, Singapore, Thailand, Vietnam, India, Pakistan, Laos, Sri Lanka; Australia; Peru; Panama; Argentina, U.S.A.

Yes, No problem, if your quantity is small,you are responsible for mould cost,if the quantity is large,we will bear the cost.If you can accept welded valvs, there is no mould cost.

Employee totally 156 including 14 technical engineer and 55 quality control engineer.

The turnover of 2014 is about 13 million USD dollars.

No. Anchor Fluid Power does not offer a valve that is suitable for Oxygen service.

It may not be. Warn/simmer or seat leakage is sometimes mistaken for set pressure. Visible or audible leakage or system pressure drop is not set pressure. The correct definition of set pressure is:For steam or most valves in air/gas service, “pop” (an audible loud pop)For liquid service, first vertical steady streamFor some valves in air/gas service (Models 230, 330, 330S, 333S, C776), first audi...

It may not be. Warn/simmer or seat leakage is sometimes mistaken for set pressure. Visible or audible leakage or system pressure drop is not set pressure. The correct definition of set pressure is:For steam or most valves in air/gas service, “pop” (an audible loud pop)For liquid service, first vertical steady streamFor some valves in air/gas service (Models 230, 330, 330S, 333S, C776), first audib...

It is normal for spring-operated safety valves to exhibit leakage or simmer/warn, as the system operating pressure approaches the nameplate set pressure, typically in the 80%-90% range of nameplate set pressure. The ASME Boiler and Pressure Vessel Code does not require a specific seat tightness requirement. A certain level of leakage is allowed per manufacturers’ literature and API-527 Seat Tightn...

A ball valve is described as a mechanical device that directs, guides and modulates the flow of various types of liquids by way of an opening of a ball which has an opening in the middle. The opening is referred to as the port. By turning the handle on the ball valve, this manually opens/closes the port which controls the pressure from the flow of the liquid. Durability and “perfect” shutdown/shut...

Yes. We can – we use our experience and knowledge to provide the best solution to your requirements and we can have special items manufactured in our factory. However, we do not make false promises and will quickly confirm if we are able to produce the requested items or if we are unable to offer you a solution.

Yes. We can – we use our experience and knowledge to provide the best solution to your requirements and we can have special items manufactured in our factory. However, we do not make false promises and will quickly confirm if we are able to produce the requested items or if we are unable to offer you a solution.

No. We believe that if a customer wants one piece or 100 pieces the same high level of service should apply.

The advantage of butterfly valve:simple structure, small size, light weight, the material consumption of the province, the installation of small size, the switch quickly, 90 ° reciprocating rotation, driving torque and other characteristics, for truncation, connected to adjust the pipeline medium,with good fluid control characteristics and closed sealing performance.But we might be confused about ...

Ball valve is evolved from the plug valve. It has the same rotation 90 degrees to mention the action, the difference is that the plug body is the sphere, with a circular through hole or channel through its axis. The ratio of the spherical and the channel should be such that when the ball rotates 90 degrees, the entire surface of the entrance and exit should be spherical, thus breaking the flow. ...

Cast iron gate mainly by the gate and gate two parts. The gate of the cast iron gate valve is the supporting member of the gate. The running slides of the gate are installed by the anchor bolts in the second concrete of the sluice pier and the gate plate, and all the water pressure To the chamber. In order to scientifically and rationally save materials and reduce their weight, cast iron gate v...

Here are the advantage of butterfly valveButterfly valve has a simple structure, small size, light weight, the consumption of materials, the installation of small size, the switch quickly, 90 ° reciprocating rotation, driving torque and other characteristics, for truncating, connected, regulating the medium of the pipeline, with good The fluid control characteristics and the closing sealing perfor...